NV200 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi my blower motor has stoped working properly and comes on when I wiggle the wire that supply’s it with power.
I have been trying to change the blower motor but can’t get it out. I can get the plug out and remove the blower from the housing but it’s trapped and won’t wiggle out I cant see anything obvious that would be easy to remove to get it all the way out without removing the entire steering column. Any ideas ?
Thanks 😕
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Ok. I assume your's is a rh drive? I have no clue what year yours is cause nobody bothers giving that information on this forum. Regardless if the steering column is in the way just remove the 2-4 bolts that hold it up and drop the column enough to get the motor out, I wouldn't remove the entire steering column unless I had to. Work smart not hard.
Hi yeah it’s a 63 plate RH drive. I’ll give that a try thanks for your reply 👍
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top