NV200 Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Have carried out a basic conversion and would like to mount a canopy or awning on the side of the vehicle. Have tried a variety of DIY rigs but would prefer a neat ready-made solution. Have been doing some serious "Googling" but everything seems to be made to fit a VW. Any suggestions?
 

·
Registered
Joined
·
21 Posts

·
Registered
Joined
·
10 Posts
The Fiamma 35 Pro 7'2" fits beautifully. Also the VW T4 lift roof for the f35 bracket works very well with no modifications or can be slightly bent to bring the awning even closer in to the van.

Stephen
Recon Campers
USA first NV200 Pop Top Camper Vans
Facebook: Recon Campers
 

Attachments

·
Registered
Joined
·
2 Posts
The Fiamma 35 Pro 7'2" fits beautifully. Also the VW T4 lift roof for the f35 bracket works very well with no modifications or can be slightly bent to bring the awning even closer in to the van.

Stephen
Recon Campers
USA first NV200 Pop Top Camper Vans
Facebook: Recon Campers
Hi there with the pop top down does the height still not exceed 2 metres with the Fiamma attached? Here in Norfolk most car park barriers are max 2 metres.
 

·
Registered
Joined
·
1 Posts
The Fiamma 35 Pro 7'2" fits beautifully. Also the VW T4 lift roof for the f35 bracket works very well with no modifications or can be slightly bent to bring the awning even closer in to the van.

Stephen
Recon Campers
USA first NV200 Pop Top Camper Vans
Facebook: Recon Campers
Hi and thanks for the pics - look great. Do you think that the VW T4 lift roof bracket would work on an NV200 without a pop-top?
Cheers :)
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top