NV200 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Can I replace an IPDM by myself, or do they need to be programmed when installed? Would the dealership need to do this, or could most shops do this? Thank you.
 

·
Registered
Joined
·
23 Posts
Yes, it is a plug & play part. No programming required, although you must ensure you have the correct one for your vehicle.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Thank you very much. Yes. Confirmed that it's valid for my 2015 Nissan NV200. The original part has an "X6" on it. The new IPDM I got has an "X7" on it. All the jumpers seem to be in the same positions and the sockets all appear to be the same. I replaced it, and after plugging everything back in, everything that was working before seems to be working afterwards. It doesn't seem to have solved my "AC not getting cold" problem though. Back to the shop for that.

Thanks.

Yes, it is a plug & play part. No programming required, although you must ensure you have the correct one for your vehicle.
 
1 - 3 of 3 Posts
Top